ArtW wrote:
eDJ, that's a pretty cool idea, but you need more than 66" long sleeping space, or at least I do
I had thought once about lengthening a bicycle trailer
Art, it would be no problem to extend that design. Even the width a little bit. For a heavier person they may want to provide for a center support for the middle of it. Something like a small "Jack Screw".
What I designed has built in drop down stands mounted in the vertical corner posts and I figured "clevis pins" could be used to lock them in place so the trailer could be leveled and stable when one gets in it. Then the bike
could be detached and used for errands or running to the bath house if in a camp ground. A shaving kit could
Velcro strap to the bike's frame.
I have one like this on a bike of my own.
Since I designed that powered trailer on that motorized bicycle message board there were some guys in northern Europe who built themselves trailers modeled after that sketch. Last they posted they were traveling on them. They liked the "all in one" concept, use of interior space, stealth, and overall simplicity. (from fabrication to use)
With that said, I don't know what it would be like operating over a long distance with a trailer pushing a bike.
I resisted using a twist handle grip throttle control for several reasons but was toying with a rod mounted to the seat tube. Then a cyclist could have his left foot positioning the left pedal to the front of the bike and the opposite with his right foot. Thus his right knee would be free to press the rod like an accelerator pedal. This rod would be spring loaded to return to center (out of the way) and at a glance look like a support for a pack bag.
the base of the rod would be attached to cable that opens and closes the carburetor. Thus this could be easily detached when leaving the trailer in camp. viola ! =)
So if a rider saw a LEO....he could begin to pedal the bicycle, the throttle would go back to idle, the centrifugal clutch
would disengage and it would be "man powered" again within an instant. The engine could be killed with the flip of a switch to cancel any noise it's making.
I once considered mounting "disk brakes" on the trailer wheels so that they may conceal the sprocket drives.
Again, I haven't operated such a trailer so I haven't been able to evaluate it in field trials. Again that would likely require another hand control or a split hand brake (where one hand brake controls two brake systems)
This would likely activate the rear brake and trailer wheels brakes.
Yes, I put some thought into traveling out of a bicycle at one time.