Mobilesport
Well-known member
- Joined
- Nov 25, 2015
- Messages
- 998
- Reaction score
- 0
DannyB1954 said:I have used 220 volt outlets and plugs to power 12 volt devices. No I don't supply 220 volts to them. They are odd shaped so a 120 volt plug will not plug into them, and the odds of somebody actually plugging a 220 volt device into them is slim to none. Even if they did, no harm would be done. https://www.fruitridgetools.com/ele...5&cadevice=c&gclid=CKqQzu6S1dECFQIOaQodfxsIjw
Home Depot carries them along with the receptacles.
blars said:Australian plugs are about the same size as US ones, the huge ones with built-in fuses are UK. 30 amp anderson powerpoles can be found for about $1/pair. (Buy extras, it takes practice to crimp them.) They are much easier to crimp with the special crimper.
I didn't realize the Australian plugs were so big , I thought they were the same size asSternWake said:The 15/30/45 amp powerpoles can attach together. They have a sliding dovetail setup. no need for connecting each wire individually. In fact one could hook an Unlimited amount together side by side if that were desirable for the application.
I have very few connectors where they are not joined together.
The Australian 220v plugs are HUGE, nearly twice the size of our standard 120vAC outlets. When i first go to the southern Hemisphere i was astounded by the size of the electrical plugs.
No way in Heck would I utilize them in a 12v system, especially in a van where space is at a premium.
I love spade connectors but I don't want to use them for outlets, I glued some of those 1/4 " spade connectors inside a grey electrical box with some goop , it's the controller to control my lights and ceiling fan from remoteTrebor English said:I use 1/4 inch spade terminals. Supply wired to females, loads have male. Red heat shrink on plus, black on minus on sources. Loads are similarly color coded if it matters. The Roadpro oven works either way.
Like house wires, all are big enough to blow the fuse. All the circuits have 30 A fuses. Built in, like Maxx fan, use the same.
I have a 12 volt DC meter, volt, amp, watt, watt hour, amp hour meter with males on input, females on output. I can use it just like a Kil-A-Watt except 12 volt DC. I usually leave the meter between the solar panel and the solar controller.
I got the idea from mobile radios. Many Icom, Motorola, Kenwood have a plastic housing that holds a pair of 1/4 inch spade terminals at 90 degrees to prevent reversing. I might go back and use JBWeld to make that sort of housing.
Enter your email address to join: