Spray Insulation For Cargo Trailer

[2WOLVES]

Hey guy's I'm beginning my build, and I'm trying to decide on the best method of insulating my cargo trailer. I was thinking about doing the spray in insulation any thoughts? BTW forgive me if I'm in the wrong place for this question,[/quote] and I'm sure this has been ask a 1000 times. SORRY

 

[WheelEstate USA]

I think I'd go with 2" foam sheets with moisture barrier. Easy and clean to work with.
Others here have more experience with cargo trailers than I do.

 

[GotSmart]

I would NOT use any foam based insulation without doing research on it first. Toxic fumes. Also low "R" values.
http://www.consumersearch.com/home-insulation/rigid-foam-board-insulation

Go here and do your research. Only you know what you can do and are willing to spend on the possibilities. I only recommend that you set your windows first. and perhaps a roof vent.
http://web.ornl.gov/sci/roofs+walls/insulation/ins_02.html

 

[akrvbob]

I only use sheets of styrofoam. Specifically I use Polyiso because it has R-6 per inch. Home Depot sells it.
Bob

 

[Blue]

I'm happy with the R4 I'm getting from reflectx, course I'm not staying in cold climates or dealing with snow in the winter. If I was going to use a foam insulation... I would probably use that basic A/B foam you get from mixing with water and pouring or slapping on as it is just cheap as hell, the spray foam stuff is just too expensive.