SternWake
Well-known member
- Joined
- Nov 30, 2013
- Messages
- 3,874
- Reaction score
- 2
Here is my kyocera 130 watt framed panel on my fiberglass roof.
It can be tilted 90 degrees toward either side of the Van, although I rarely tilt it ever.
In 2012 I added a Unisolar pvl-68 stick on panel for 68 more watts. This does not fit the crown of my roof perfectly, sticking up about 3/4 of an inch on one spot.
If I had to do it over, I'd make 4 corner feet like I did for my 130 watt panel, but I'd get a huge 300+ watt panel. These corner feet are fiberglassed to the roof.
I built a mock up panel when I was making the corner feet, and keep it ass low to the roof as possible. The curve of the roof ensures proper ventilation.
Painting my panel frame white also helps keep it a bit cooler and slightly less noticeable
You do NOT need a flat surface to mount a solar panel, it just makes it easier if it is.
It can be tilted 90 degrees toward either side of the Van, although I rarely tilt it ever.
In 2012 I added a Unisolar pvl-68 stick on panel for 68 more watts. This does not fit the crown of my roof perfectly, sticking up about 3/4 of an inch on one spot.
If I had to do it over, I'd make 4 corner feet like I did for my 130 watt panel, but I'd get a huge 300+ watt panel. These corner feet are fiberglassed to the roof.
I built a mock up panel when I was making the corner feet, and keep it ass low to the roof as possible. The curve of the roof ensures proper ventilation.
Painting my panel frame white also helps keep it a bit cooler and slightly less noticeable
You do NOT need a flat surface to mount a solar panel, it just makes it easier if it is.