I can’t find a single video on van build and BLUETTI (B300/AC300) storage. Argh.

[PattySprinter]

I have a B300 (x2) and an AC300 and I’m trying to figure out the safest way to configure them into the van build.

Any ideas and pictures or video would be greatly appreciated.

Thank you so much!

 

[maki2]

I have a B300 (x2) and an AC300 and I’m trying to figure out the safest way to configure them into the van build.

Any ideas and pictures or video would be greatly appreciated.

Thank you so much!

They do not get built into a van. You just leave an open area to place them in. If you need to add hold down straps then you look for a strong point to anchor the straps to. I use webbing staps through a footman loop that is screwed into wall, cabinet or the floor depending on what I need to secure and where it is.

 

[Tony's Dream]

This link talks about them.....not sure about the van install.

 

[jacqueg]

I removed my passenger seat. Abnorm built a small cabinet that contains my battery, DC-DC charger, and inverter. Bonus feature of cabinet - houseplants perch on it.