Shower Head connected to sink faucet

[JoRow]

Hey guys,

I have a Camco rv shower head that I'm attempting to connect to my sink faucet. 

My faucet is a "junior" size and I was hoping to be able to unscrew the aerator and screw on the shower head whenever I needed to use it. The shower hose looks like it would be a perfect fit except that the threads on the faucet end are much finer. 

Does anyone know if there is some sort of adapter made for this?

 

[highdesertranger]

I don't know about a Camco adaptor, but there are adaptors for aerators. there is even a garden hose adaptor. highdesertranger

 

[Matlock]

If it's the one I'm thinking of it's a 1/2" FIP male end on your shower head. ACE hardware should have an adapter.

 

[ZoNiE]

Take both the aerator and shower hose to ace they'll hook u up

 

[Mobilesport]

What do you use for a shower stall?

 

[JoRow]

Thanks guys I found the adapters I needed at Home Depot. I'm not sure why that was so perplexing to me haha.

For my shower stall I just ordered a little popup stall tent from Amazon and cut a hole in the side for my shower head. It works pretty great so far but I need to add some temp control back there and add a pressure switch to my old water pump so it will cycle on and off as required, instead of running full time.


Sent from my iPhone using Tapatalk

 

[highdesertranger]

to keep the pressure up and the pump not running continuously you need an accumulator tank. like this, https://www.amazon.com/SHURflo-182-...g_3?ie=UTF8&psc=1&refRID=BWKXZP9HX5X3FCRPCTC8 . highdesertranger

 

[JoRow]

Thanks HDR. That is exactly what I need.

For the pressure switch, would you recommend buying a standalone one to add to my system or picking up a new pump with one built in?

Or does this negate the need for that also?



Sent from my iPhone using Tapatalk

 

[highdesertranger]

the pressure switch is built into the pump. highdesertranger