Hello all, forgive the long story below,
Initially I used a 4 inch PVC tank that reduces and feeds through a 1/2 inch tube into the faucet I installed. The tank in it's present state is pictured below.
While the system does work all said and done, the water only comes out at a steady drip, taking 10-15 minutes to fill 1 cup/8 ounces. I initially tried adding an air admittance valve, thinking it needed more air flow. This changed nothing. Next I capped and sealed the tank, and added a air nozzle so I could pump it with my bike pump, but this doesn't seem to be building any pressure either. What can I do? I can't feasibly wash dishes like this.
Thank you for your time and consideration.
https://photos.app.goo.gl/MkqwhaU14MxKtfXs9
Initially I used a 4 inch PVC tank that reduces and feeds through a 1/2 inch tube into the faucet I installed. The tank in it's present state is pictured below.
While the system does work all said and done, the water only comes out at a steady drip, taking 10-15 minutes to fill 1 cup/8 ounces. I initially tried adding an air admittance valve, thinking it needed more air flow. This changed nothing. Next I capped and sealed the tank, and added a air nozzle so I could pump it with my bike pump, but this doesn't seem to be building any pressure either. What can I do? I can't feasibly wash dishes like this.
Thank you for your time and consideration.
https://photos.app.goo.gl/MkqwhaU14MxKtfXs9