wrcsixeight
Well-known member
- Joined
- Sep 14, 2012
- Messages
- 537
- Reaction score
- 0
I have never used a catalytic heater, but my understanding is they do not heat the air so much as heat items in the line of site of the hot plate by radiation, which then heat the air by convection.<br><br>I am envisioning putting a Coleman Blackcat/sportcat about 1 foot from my roof, aiming down ward at a 30 to 45 degree angle. Best place for this would be under where my roof vent is, shining on my third chair to heat me and my bed. It would fit very well here, be very convenient, if it would function properly, and still be safe. <br><br>I am wondering how hot the roof would get directly above in this orientation, or if most of the heat would be radiated downward as I would prefer.<br><br>My roof vent has 2 inline 120mm computer fans and I do not shut them both off completely until it falls below ~50f. I do not cover the vent until below 45. I like fresh air, and I do not get cold easily.<br><br>I am not really fearing the CO build up or oxygen depletion so much as I am worried the unit is not safe to operate pointing downward, or that so much heat rises directly off of it that the roof itself is in danger of melting or worse. If this needs to be on the floor only aiming upward, then I'll pass on this type of heating, as I've rarely ever 'needed' heat in my current location, and I could just put my cast iron skillet on my single burner stove for the times I might move that need/want line a little further to the left.<br><br>It would certainly be easier to get out of bed in the morning if I knew I could fire this thing up and have some "sunlight" shining on me from above, and if I were to fall asleep with it on, the vent directly above it would make CO poisoning a non factor.<br><br>So what say you all?