Good Drying option under mattress

[Matlock]

I typically just turn my cushion bed on its side to allow for air circulation after a nights sleep. Keeps the mold at bay.
Lately I've grown tired of that and went looking for something cheap that is ideally a plastic mesh designed for mattress ventilation or a good substitute.
Unfortunately what is available for a single size bed has a starting price of $50. I'd usually buy it, but ..
Found some of these at amyzone....

12Pcs Drainage Interlocking Floor Tiles 11.8" x 11.8", Modular Interlocking Cushion Soft PVC Floor Non-Slip Splicing Waterproof Mat, $28.00​

Just copy/paste the bold text in amyzone to see the product.

These are in the price range for my budget. 0.55" thick and interlock. These should work fine without drilling any vent holes under the mattress.

Note: I have avoided drilling for venting because the plywood sheet under my bed is also the top of the drawers under the bed. When the drawers are closed they are sealed on all sides which keeps any small critters out of my clothing and bedding, etc. that is kept in the drawers. So, back to the venting options.
Anyone else have a suggestion that does not include a drill?

 

[bullfrog !]

I typically just turn my cushion bed on its side to allow for air circulation after a nights sleep. Keeps the mold at bay.
Lately I've grown tired of that and went looking for something cheap that is ideally a plastic mesh designed for mattress ventilation or a good substitute.
Unfortunately what is available for a single size bed has a starting price of $50. I'd usually buy it, but ..
Found some of these at amyzone....

12Pcs Drainage Interlocking Floor Tiles 11.8" x 11.8", Modular Interlocking Cushion Soft PVC Floor Non-Slip Splicing Waterproof Mat, $28.00​

Just copy/paste the bold text in amyzone to see the product.

These are in the price range for my budget. 0.55" thick and interlock. These should work fine without drilling any vent holes under the mattress.

Note: I have avoided drilling for venting because the plywood sheet under my bed is also the top of the drawers under the bed. When the drawers are closed they are sealed on all sides which keeps any small critters out of my clothing and bedding, etc. that is kept in the drawers. So, back to the venting options.
Anyone else have a suggestion that does not include a drill?

If you could elevate the bedding a few inches on upside down milk crates cut down and glued together maybe There would be enough air flow?

 

[Matlock]

If you could elevate the bedding a few inches on upside down milk crates cut down and glued together maybe There would be enough air flow?

That would work for sure but I don't have but two. I'd need another 6 for the whole bed and the cheapest I can find is home depot for $11 each.
Thinking it through, there are 5 sides to a milk crate. sooooo

 

[Matlock]

Yes if I cut up these two crates I'd have 10 pcs. Now how can I glue these together.... Hummm

I really like FFN
(free for nutt'in)

 

[bullfrog !]

Yes if I cut up these two crates I'd have 10 pcs. Now how can I glue these together.... Hummm

I really like FFN
(free for nutt'in)

You need to elevate the crate sides so air can flow with something like maybe wood strips from a discarded pallet, check Craigslist for free pallets. Maybe screw them to the wood instead of glue?

 

[maki2]

The easy solution is to keep moisture from getting into the mattress. That way it never gets underneath the mattress to condense against a cold surface. You can buy mattress covers and mattress pads for doing that. Not expensive or labor intensive

People get their heads all wrapped into what goes around and around in these forums never stopping to actually think through cause and effect. Then their ability for a fresh and sensible viewpoint as well as much easier alternatives goes out of sight, totally shut down, never getting tapped into. Mothers have to deal with this stuff for years by keeping their babies and toddlers wee-wee moisture out of mattresses.

Your body releases the warm moisture while you are sleeping. Warmth migrates to the cold taking the moisture with it. All you have to do is prevent the moisture from being absorbed into the mattress itself. An ounce of prevention and you do not need a carpentry cure. It is science but not very complex science. The solution is sold at Walmart in the section where they sell bedding.

 

[Matlock]

The easy solution is to keep moisture from getting into the mattress. (snip) An ounce of prevention and you do not need a carpentry cure. It is science but not very complex science. The solution is sold at Walmart in the section where they sell bedding.

My Cushions are 32x32X6" and I use 3 of them make up my mattress. They also double as my table seat cushions. I looked at what walmart has available and they do offer zipper plastic mattress covers, smallest is a twin. Along your thought process, I'm guessing someone makes a baby's crib mattress plastic cover that might cram inside the three 32x32 cushions I have. Great tip, I'll take google dive today.