Peak inrush current is less than a second when the internal capacitors are charging up. The current will drop rapidly from there, leveling off to the 'normal' current requirements. Normally it is such a short duration that the breakers or fuses will not trip even if they are rated at 20, 25 or 30 amps. Peak inrush current is not the same as the peak current when a compressor or motor is starting up, it is similar but MUCH shorter in duration.
A typical TT-30 plug and receptacle is rated at 30 amps...but here is the tricky part: Other items like the microwave and the roof air will be using some of that, so you never have that full current for a converter. But, as you plug the RV in to the 30 amp shore supply, there may be a very brief spike of inrush current to the converter, but the roof air and the microwave will not normally be operating in the first few seconds of being plugged in, even if they were turned on.
But, if that PD45 is being used in a larger RV on a 50 amp RV circuit then there will be no problems at all.
A typical TT-30 plug and receptacle is rated at 30 amps...but here is the tricky part: Other items like the microwave and the roof air will be using some of that, so you never have that full current for a converter. But, as you plug the RV in to the 30 amp shore supply, there may be a very brief spike of inrush current to the converter, but the roof air and the microwave will not normally be operating in the first few seconds of being plugged in, even if they were turned on.
But, if that PD45 is being used in a larger RV on a 50 amp RV circuit then there will be no problems at all.