Phantom loads

[JRRNeiklot]

My Trimetric battery monitor shows a constant 3.4 amp draw.  The only loads I cannot easily turn off are the clock on the radio and the co detector.  Plus whatever the Trimetric itself is drawing.  This should be nowhere near 3.4 amps.  I have disconnected power completely, and the monitor shows zero, so the monitor seems to be working fine.  Anyone have any idea where this parasitic drain may be coming from?

Thanks.

 

[Trebor English]

Is there an inverter still connected but no AC load?

It is often easiest to pull fuses to find the load.

 

[bigskybob]

If that is DC current,that's not much draw.

 

[JRRNeiklot]

3.4 ah over 24 hours is 81.6 ah.

 

[B and C]

Pull a fuse and check the draw, pull a fuse and check the draw, keep going until the offending circuit is identified. Disconnect devices on that circuit after putting that one fuse back in.

 

[Groovy2]

my 300 watt Gopower PS inverter draws 4 watts idling -

3 dash cams draw 16 watts total

32 inch Samsung TV draws 20 ish watts

3.4 amps is 40ish watts