highdesertranger said:
You keep mentioning space, if you have such limited space where are you going to take a shower?
Where is the grey water going to go?
How many gallons is your tank? What is the GVWR of the van and what does it weigh now?
How many gallons of coolant does your engine hold? if it's like most modern vehicles it's very little. Your idea of circulating the water without the engine running is going to cool the engine water fast. What are you going to do when the engine thermostat closes stopping circulation?
Where is this heat exchanger going to be located? If it's inside the living space along with a hot water tank, in the summer it will make the inside of the van very hot. If it's outside the living space in the winter it's going to cool off very fast.
Do you realize that you really can't alter the temp off the coolant very much. What I mean is your heat exchanger can not make the van's coolant run much cooler. The computer won't like it.
You know about Murphey and his law. it's usually best not to invite him along with one off custom stuff at first.
Sorry about being a downer, I am just playing devils advocate.
It is my opinion that at least at first you should try to keep everything simple. Get on the road and see what you actually need first.
Having said all that I do like the idea and I hope you report all your findings here. Good luck.
Highdesertranger
I appreciate the input, but really I think I have everything fairly well considered.
I have a little bit of space set aside that I should be able to shower in. It won't be a permanent thing, but probably using a collapsible basin I can fold away when not in use.
The payload capacity of the van is 1600lbs. Even with the water tank full, I estimate that my total build is only going to add about 600lbs to the empty van. I'm being pretty conscious about weight in the build, and not using a bunch of heavy materials.
The heat exchanger is going to be tapped into the heater core circuit of the cooling system. This circuit of the cooling system does not run through the thermostat. So theoretically if coolant kept circulating with the engine off, the coolant would only cool off once it pulled all of the heat out of the engine block itself. I think that's plenty of stored heat. And honestly, even if I had to keep the engine running to have hot water just for a shower, it's a 2.0L 4cyl. It's not like I'm going to be idling some huge V8 here. I'm not too worried about it.
The heat exchanger is mounted underneath the vehicle. I did not like the idea of running hot/pressurized coolant into the living area in case of leaks. I plan to have the system automatically circulate fresh water and/or coolant through the exchanger if it gets near freezing to prevent it from freezing up, and I'll have a drain valve underneath the van if I really want to be sure it won't freeze up. It's probably going to be for mostly summer time traveling anyway, but I am building it to be able to handle the cold too.
I don't think having this heat exchanger will alter the temperature of the coolant too much. Again it's going to be on a circuit of the cooling system that doesn't run through the thermostat. So if the heat exchanger actually removes so much heat that it begins to cool down the coolant, the thermostat would close, cutting off flow through the radiator.
So to really cause a problem, this heat exchanger would need to remove so much heat that the engine still doesn't warm up with all flow to the radiator cut off. I don't see it happening. Even if it does, maybe in the most extreme case, it would throw a "failure to maintain engine temperature" code similarly to when you have a thermostat that sticks open. But that's about it. No big deal. Clear the code and move on.
Yes I know this is a pretty complex idea, but I really think I can get it to work. And if I do, it will be a great way to get hot water without propane.
I'll keep people updated, but I don't anticipate getting the whole system put together for another few months. Currently I'm working on the rest of the inside of the van, and the cold weather is going to keep me from being able to work on it these next few weeks.