Tomcor
Well-known member
- Joined
- Apr 22, 2015
- Messages
- 245
- Reaction score
- 0
This bed frame is built with 2x2's with 1/4" ply on the sides and top.
The top plywood under mattress is cut in 2 pieces and hinged for storage access.
Covered the outside with speaker box carpet. Mattress is 4" hd foam with 2" memory foam on top.
Trying to sew the covers was a real project. First time using a sewing machine.
Need to figure out what to do next with the windows. Maybe cutout some 1" or 2" foam sheet insulation for the big windows and fasten some plywood with speaker carpet level with the conversion van walls?
Not sure how to add more then one picture per post. Using an Ipad.
The top plywood under mattress is cut in 2 pieces and hinged for storage access.
Covered the outside with speaker box carpet. Mattress is 4" hd foam with 2" memory foam on top.
Trying to sew the covers was a real project. First time using a sewing machine.
Need to figure out what to do next with the windows. Maybe cutout some 1" or 2" foam sheet insulation for the big windows and fasten some plywood with speaker carpet level with the conversion van walls?
Not sure how to add more then one picture per post. Using an Ipad.
