4RunnerBlues
Well-known member
- Joined
- Aug 1, 2018
- Messages
- 66
- Reaction score
- 0
Hi All, I would appreciate any information on removing and replacing the connector shown at the end of this post. This is connection between hoses (11/32” I think) in and out of the small transmission cooler inside radiator to the 3/8” metal transmission lines. I need to replace a damaged hose and should also change the ATF.
There’s some youtubers who grind these things off and replace these fittings with regular hose clamps. I’m hoping there’s a better way.
Also, your input on whether to add another transmission cooler, and if so, what type?
Ok, here’s the fitting which appears to be a compression type. Your thoughts appreciated.
Ok, for some reason I can’t post a photo (profile missing) and will try to do that later. Fitting is similar to an AC fitting. I don’t see any clips.
Sent from my iPhone using Tapatalk
There’s some youtubers who grind these things off and replace these fittings with regular hose clamps. I’m hoping there’s a better way.
Also, your input on whether to add another transmission cooler, and if so, what type?
Ok, here’s the fitting which appears to be a compression type. Your thoughts appreciated.
Ok, for some reason I can’t post a photo (profile missing) and will try to do that later. Fitting is similar to an AC fitting. I don’t see any clips.
Sent from my iPhone using Tapatalk