WannaBeFree
Well-known member
- Joined
- Oct 27, 2016
- Messages
- 65
- Reaction score
- 0
Attached is an image from above my refrigerator in my Coleman CTS192. There is a wood strip from which I removed four screws. My hope was I could remove that strip and the panel behind to get to wires dropped down from the roof refrigerator vent and access DC/AC wiring from the power distribution panel below.
After removing the screws the wood strip was still firmly attached and would not budge. Any suggestions on how to remove that wood strip and the panel behind without damaging the wood?
I want to install AC & DC outlets in this area for a roof mount camera system.
After removing the screws the wood strip was still firmly attached and would not budge. Any suggestions on how to remove that wood strip and the panel behind without damaging the wood?
I want to install AC & DC outlets in this area for a roof mount camera system.