A Dream Come True!... With the Undertones of a brewing panic attack

Van Living Forum

Help Support Van Living Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ReelMobile

New member
Joined
Oct 30, 2024
Messages
4
Reaction score
3
Location
Los Angeles, CA
Hi Everybody! Gosh I hope I can get some guidance here because there's only so many google searches one can do before you want to give up and just lie down on the cold uncarpeted metal floor of your cube.

What can I say about my new truck. She's just my pride and joy. When I look out of my apartment down to the street and see her sitting there, I actually giggle a little. She's loud and proud and has had many interesting uses before I got her this month.
For 6 years, I have wanted to create a mobile 'self-tape' studio for actors. This truck has been the missing piece, and once I saw her online, I went to the lot that day to look at her.
She was used for some sort of government surveillance business(Cool!), because they had wires along the ceiling and outlets along the walls, an eye wash station, and a place for a generator.

It was a whirlwind romance- The bones were great and the test drive was awesome, so I immediately made my rounds to my credit union to secure the a loan. The truck was too old (2011) and had too many miles (120,000) to qualify for a car loan, so I had to use my paid-off personal vehicle as collateral to secure the cash.

The Pros- She was definitely taken care of, and has the maintenance records to prove it. She came with a sidedoor, full-size cab access doorframe, and a roof AC. There's a backup camera, but I don't know if that counts because it doesn't work...

The Easy Cons- The Side-door needs a new lock rod clip, so right now, I have that bolted shut so it cant fly open on the freeway.
There's loose wires and outlets hanging out of the wall, and a smattering of fiberglass insulation peaking through the corners of the ceiling.
The rolling cab-access door is MIA, and I'm pretty sure the work was done out-of-state, so I have no idea how to replace that.
Graffiti- I live in Los Angeles- I'm used to packages being stolen, but when I came out on day 2 of owing her and had some stupid taggers write nonsense on the side of her, I almost lost it. Does anyone have any magic potions that either remove graffiti or something you can put on the body to dissuade paint and oil markers from sticking?

The Less Easy Cons- The car lot who sold her to me had some eccentric mad-scientist-electrician cut all the wires out of the cube, some of which I'm pretty sure didn't need to be cut (ie, camera cable?).
There was some snakey looking wires coming up through the floor of the box, and as I followed them under the body of the chassis, they were zip-tied all along the bottom, then into the engine, where they were attached to my truck battery. I found that out the hard way when I tried to cut them in the cube and they sparked. Woops.
The roof AC doesn't work, which wasn't a huge surprise, but trying to find where THAT wire goes has been tricky. And that REAR CAMERA- I see the camera, I see the screen in the cab; but where they connect, I have Zero Idea.

The Biggest Challenge- I am not an electrician, a mechanic, or a woodworker. I can handle a drill, basic sawing, and framing, but when you live in a crowded area, people don't look kindly on power tools at 10 pm. I really want to get to the fun stuff, but I cant do the insulation or the carpeting until I can safely back the truck up (camera) and get that cab door on.

I hope to find a lot of cool resources and ideas here from people who have done the trial-and-error before me! Cheers!
PS- I've of course added some photos. She really is special.

IMG_20240930_181842527_HDR.JPEGIMG_3900.JPEGIMG_3383.JPEGIMG_3380.JPEGIMG_3388.JPEGIMG_4091.JPEG
 
Hello Reel and thanks for joining us.

I have always liked the idea of a cut-away-cube van as a DIY conversion. Mostly straight walls and just the right size for what you need to carry.

Lots of experience is on tap in this forum, so don't hesitate to ask any and all questions.

Good luck and please keep us updated on your journey.
 
Welcome. Figuring out what wire goes to what. That is definitely going to be a challenge and it will take time. You should look into getting a continuity tester that emits a tone. Most likely the brand you buy will have posted a video on YouTube showing you how to use it. That type of tester lets you work on your own without a partner.

Basically on a non live circuit you fasten the the tester end with the tone emitter to the end of something like the backup camera wire and then test wire ends you suspect might be the right ones until you hear the tone go off. When you hear it you know you got the other end of the wire that goes to that camera wire you hooked the tone emitting unit onto. Not saying it will be quick and easy but at least it is a start for figuring out what those wires go to without needing to obtain a degree in electrical engineering.

Label everything. Take notes, make sketches, take photos and add notes to the photos. Unless you have a photographic memory you need to document it all then eventually learn how to draw up a simple wiring diagram to keep handy for future troubleshooting, repairs and improvements.
 
Welcome to the Van Living Forum Reel :)

Sorry you got tagged.

I used to work in sign shops and we had this problem a lot. We used to get cases of Graffiti remover spray cans. You spray it on liberally and wait a few seconds and then wipe the graffiti off. It works on many substances including lipstick. (yeah.....not all vandals work with spray paint)

Just make sure it says "Graffiti Remover" (and not paint remover)

Home Depot offers this:

Graffiti Remover

Amazon and others offered here

Google Search Amazon
 
Welcome. Figuring out what wire goes to what. That is definitely going to be a challenge and it will take time. You should look into getting a continuity tester that emits a tone. Most likely the brand you buy will have posted a video on YouTube showing you how to use it. That type of tester lets you work on your own without a partner.

Basically on a non live circuit you fasten the the tester end with the tone emitter to the end of something like the backup camera wire and then test wire ends you suspect might be the right ones until you hear the tone go off. When you hear it you know you got the other end of the wire that goes to that camera wire you hooked the tone emitting unit onto. Not saying it will be quick and easy but at least it is a start for figuring out what those wires go to without needing to obtain a degree in electrical engineering.

Label everything. Take notes, make sketches, take photos and add notes to the photos. Unless you have a photographic memory you need to document it all then eventually learn how to draw up a simple wiring diagram to keep handy for future troubleshooting, repairs and improvements.
Wonderful advice, thank you! This is what I'm here for!
 
Welcome to the Van Living Forum Reel :)

Sorry you got tagged.

I used to work in sign shops and we had this problem a lot. We used to get cases of Graffiti remover spray cans. You spray it on liberally and wait a few seconds and then wipe the graffiti off. It works on many substances including lipstick. (yeah.....not all vandals work with spray paint)

Just make sure it says "Graffiti Remover" (and not paint remover)

Home Depot offers this:

Graffiti Remover

Amazon and others offered here

Google Search Amazon
LOL lipstick, yes! The hardest part was that the outside of the box isn't a nice smooth surface, it has some texture. I'll be picking up a bottle of that asap, thank you!
 
As to preventing graffiti from sticking to your van. I do not myself know of a specific product but I can tell you how to find some. Open a search engine and enter these keywords
“Anti graffiti coating paint vehicle”

You will need to research and make a choice between products. It will come down to cost and your specific location and physical restrictions for methods to apply those materials to the surface.
 
Top