kpinvt
Member
- Joined
- Sep 5, 2017
- Messages
- 14
- Reaction score
- 1
My wife Fran and I bought a baby toy hauler last summer. It's a functional RV but a little spare on storage space. I bought one these from a local Walmart for about $50 plus tax. It is well made for what it is, lightweight and fairly sturdy. What I like most about it is that the each of the drawers has five rollers to help in making it easy to slide the drawers in and out. There are three rollers on the bottom rear and two at the top rear in the corners.
[font=Arial, Helvetica][img=500x300]http://www.sterilite.com/productfiles/images/PD1_01743V01.jpg[/img]
[font=Arial, Helvetica]rawer Units
4 Drawer Unit[/font]
The drawers glide so well that to keep the drawers from rolling open when traveling I bought four of these latches on Amazon: https://www.amazon.com/gp/product/B01MR126O6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1[/font]
[font=Arial, Helvetica]The four I bought are way too large and heavy for this application. A much smaller latch would be fine I think. I went a little overboard on this installation. I used pop rivets to mount the pieces in the plastic body of the unit. I think it would be OK to use just the rivets alone. On my unit I used a whole saw to cut a one inch disk out of the inside of the case so I could use a flat washer as a backing to mount the rivet through. Velcro tabs might be easier to use if they stick to the plastic OK.[/font]
[font=Arial, Helvetica]
[/font]
[font=Arial, Helvetica]
The 4 Drawer Unit is a versatile storage solution ideal for use in the garage, utility room, dorm room or bedroom. Each large-capacity drawer glides smoothly, even under a heavy load, on hidden rollers.
[/font]
[font=Arial, Helvetica][img=500x300]http://www.sterilite.com/productfiles/images/PD1_01743V01.jpg[/img]
[font=Arial, Helvetica]rawer Units
4 Drawer Unit[/font]
The drawers glide so well that to keep the drawers from rolling open when traveling I bought four of these latches on Amazon: https://www.amazon.com/gp/product/B01MR126O6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1[/font]
[font=Arial, Helvetica]The four I bought are way too large and heavy for this application. A much smaller latch would be fine I think. I went a little overboard on this installation. I used pop rivets to mount the pieces in the plastic body of the unit. I think it would be OK to use just the rivets alone. On my unit I used a whole saw to cut a one inch disk out of the inside of the case so I could use a flat washer as a backing to mount the rivet through. Velcro tabs might be easier to use if they stick to the plastic OK.[/font]
[font=Arial, Helvetica]

[/font]
[font=Arial, Helvetica]
The 4 Drawer Unit is a versatile storage solution ideal for use in the garage, utility room, dorm room or bedroom. Each large-capacity drawer glides smoothly, even under a heavy load, on hidden rollers.
[/font]