Leaking Roof Vent

Van Living Forum

Help Support Van Living Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VanTrekker

Well-known member
Joined
Jan 20, 2012
Messages
707
Reaction score
0
Location
Iowa
<p style="margin: 0px;">Yep, the roof vent leaked a little tonight.&nbsp; It's just a few small drops - maybe a dozen during an hour long heavy rain.&nbsp; Nonetheless, it will have to be repaired.</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">Question:&nbsp; For those of you who had to repair a roof vent leak did you just add more sealent?&nbsp; If so, did it work?</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">I may end up pulling the fan assembly out, installing a new gasket, and completely reseal it.&nbsp; </p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">I bought the grey sealent from an RV dealer who said it's better than the self leveling stuff.&nbsp; The only problem is that it looks like it's shrinking and pulling away.&nbsp; So, did you guys use self-leveling or just a good quality RV sealent?</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">Any other tips?</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;"><br>VT</p>
 
I would think - do it right now - not at the last minute - summer is coming <IMG src="https://vanlivingforum.com/images/boards/smilies/cool.gif" align=absMiddle border=0><br><br>Pull the fan - if you cant get the correct gasket from the manufacturer - get some sheet material from a auto / camper repair house and use G-E 20 year silicone sealant from Home Depot on both sides of the screw heads <IMG src="https://vanlivingforum.com/images/boards/smilies/thumb.gif" align=absMiddle border=0><br><br>Photo's ?&nbsp;<IMG src="https://vanlivingforum.com/images/boards/smilies/wink.gif" align=absMiddle border=0><br>
 
<p style="margin: 0px;">Thanks for the info... I will look for the 20 year GE silicone&nbsp;sealent.&nbsp; I agree with you - pulling it is the best option.&nbsp; In the meantime, a gasket will be ordered ASAP.</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p>
 
<p style="margin: 0px;"><img style="width: 139px; height: 98px;" border="0" hspace="0" alt="" align="baseline" src="http://www.infamouskidd.com/wp-content/uploads/2011/02/superman-logo.jpg" width="577" height="621"></p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">SUPER ADVICE!&nbsp;&nbsp;&nbsp; Thank you!</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">&nbsp;</p>
 
Even better than 20 yr silicone, is the Gutter and Flashing Sealant , also sold in Home Depot, near the gutters, downspouts and shingles. Made for metal and plastic, 50 yr warranty, grey , paintable ( silicone is not) but pricey at $8/ tube. Stickey, gooey stuff, does not come off anything easy, including your hands, so wear latex gloves if you are sensitive. I used it around my roof hatch, and to help seal several holes left from removing the roof antenna mounts on the bus. Also works great for house gutters and flashing.....
 
What Les said +1, or butyl which never hardens completely....also real messy. Butyl tape is more user friendly- do the job on a warm day, tighten down the screws a little at a time to compress the tape....<br>Agree with remove, clean well, reinstall with sealant between parts, not just slobbered around the seams. <br><br>edit- are you sure the leak is where the unit mounts to the van, or is the seal on the vent lid not sealing? If it is the lid-self adhesive foam weatherstrip from HD can cure that....<br>
 
My bathroom vent had a crack in it, then half of it broke off.&nbsp; The replacement lid was only about $14 and was an easy job.<br><br><br>
 
<p style="margin: 0px;">Hopefully it's fixed now.&nbsp; I had used butyl tape and upon re-inspection, it looked like I had done a pretty good!&nbsp; Due to a mobility problem,&nbsp;it was difficult to&nbsp;reach some of the screws to tighten and caulk them.&nbsp; I found several loose screws toward the back;&nbsp;one of them had not being caulked at all.</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">I stripped the caulk off, re-torqued, and then used a "semi self-leveling" sealent from Home Depot.&nbsp; Looks great.</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">One interesting thing... I had noticed the lid didn't open and close easily.&nbsp; It was binding.&nbsp; Upon inspection, I discovered a little booger of caulk on the plastic lid&nbsp;that made it chatter.&nbsp;&nbsp;After cleaning the lid, it opens and closes much better.&nbsp; That was worth the work.</p><p style="margin: 0px;">&nbsp;</p><p style="margin: 0px;">On the downside, this evening&nbsp;I was most of the way up the step ladder (which was in horrible condition).&nbsp; It suddenly collapsed (right leg buckled) throwing me against the van and to the ground.&nbsp; No harm done - just a real fast drop.&nbsp;&nbsp;I laughed until&nbsp;remembering that 82&nbsp;year old Dad&nbsp;had been using the ladder recently.&nbsp; I bought a new one immediately!&nbsp; The fall didn't hurt me but could have been very dangerous for Dad!</p>
 
Hi,<br>Selleys Roof or Gutter silicone is also a good option for your solution .This silicone is non acid and suitable for rainy season.It is available in market in different range and colors.<br><br>
 
<br><span style="font-family: 'comic sans ms', sans-serif;"><strong>VanTrekker, I've installed 4 so far, &amp; all I've ever used was that putty-tape. So far, I've never had a leak, knock on wood!</strong></span><br><br><span style="font-family: 'comic sans ms', sans-serif;"><strong>I expect to be doing a vent-fan replacement this summer, replacing that puny little factory-installed bathroom vent fan, with a FanTastic. Would have done it already, but as U know, they're kinda pricey, &amp; I haven't been able to swing one yet.</strong></span>&nbsp;<br><br><span style="font-family: 'comic sans ms', sans-serif;"><strong>Glad U &amp; especially your Dad weren't hurt by that treacherous ladder!&nbsp;<img src="/images/boards/smilies/thumb.gif" class="emoticon bbc_img"><br><br></strong></span>
 
Hi Sir Joey,<br><br>I used the putty tape on the initial install and have been very happy with it.&nbsp; I did that last repair 10 months ago and so far, no leaks!<br><br>I love the Fantastic vent.&nbsp; It's a well-built product and that motor is pretty tough.&nbsp; I think you'll be happy with it.&nbsp; My favorite feature is the rain sensor.&nbsp; That's a must in Iowa during March - June as well as some of the fall months.&nbsp; It's saved my butt several times (the laptop sits under the vent!)&nbsp; The only gripe is that it sometimes the moisture sensor closes the ven when&nbsp;the weather is&nbsp;a little foggy... but you can override it.<br><br>Take care.<br><br>Brad<br><br>
 
<br><span style="font-family: 'comic sans ms', sans-serif;"><strong>Hey VT, yeah, I know I'm gonna love the Fantastic, cuz I already installed one as part of my little cargo trailer conversion, complete with vent cover, which is a very worthwhile addition, enabling one to not only leave the vent open during the rain, but even while traveling! (As I'm sure U know&nbsp;<img src="/images/boards/smilies/smile.gif" class="emoticon bbc_img">) Plus, I had a slide-in truck camper which had one installed from the factory. That was actually my first one, &amp; from that moment on, I was SOLD!&nbsp;<br><br>Somebody here on the forum had one for sale just a couple months ago. I need one, &amp; wanted it badly, but unfortunately, I just couldn't spare the money, even though the price was good, so now, I'll prolly end up paying full price for a new one.&nbsp;<img src="/images/boards/smilies/frown.gif" class="emoticon bbc_img"><br><br>Anyway, I plan on installing BOTH, the fan AND the vent cover on this thing, hopefully before the scorching SC summer heat arrives!<br><br></strong></span>
 
Yep, you can't beat butyl tape. That and self leveling caulking made and sold for RVs.<br><br>I had a new 9x9 mini roof vent installed on mine at an RV shop. I wanted a 14x14 but they wouldn't cut the hole bigger to install one so I had them just put a new 9x9 one. The old one had a pull chain, the screen was damage and it didn't seal real well anymore The new one has a twist/turn handle and closes/sealed very well.
 
Top