Pixelchrome
Active member
- Joined
- Jul 11, 2018
- Messages
- 29
- Reaction score
- 1
Hi All;
Just wanted to share what I've done to convert my Toyota Roastmaster Oven back into a car.
First thing I did was to buy a Reflectix for the front windshield.
But used on the interior, actually only improved the deep cooking ability of the car.
There goes $20.
Then I thought, it naturally belongs on the outside of the car like RV windshield covers.
So, that's where I put it.
It was just the right size that the upper corners could be folded around the pillars and held in place by the door window frames.
Add a few strips of industrial velcro, and I could open and close the door freely without it blowing off.
Tip: Clean the paint with acetone where you stick the velcro to remove wax and dirt. (otherwise the velcro just peels off)
Con't in next post.
Just wanted to share what I've done to convert my Toyota Roastmaster Oven back into a car.
First thing I did was to buy a Reflectix for the front windshield.
But used on the interior, actually only improved the deep cooking ability of the car.
There goes $20.
Then I thought, it naturally belongs on the outside of the car like RV windshield covers.
So, that's where I put it.
It was just the right size that the upper corners could be folded around the pillars and held in place by the door window frames.
Add a few strips of industrial velcro, and I could open and close the door freely without it blowing off.
Tip: Clean the paint with acetone where you stick the velcro to remove wax and dirt. (otherwise the velcro just peels off)
Con't in next post.
Attachments
-
keep_cool01.jpg204 KB · Views: 7
-
keep_cool02.jpg170.3 KB · Views: 6
-
keep_cool03.jpg187.4 KB · Views: 7
-
keep_cool04.jpg205.9 KB · Views: 5
-
keep_cool05.jpg200.7 KB · Views: 5
-
keep_cool07.jpg132.1 KB · Views: 5
-
keep_cool08.jpg144.7 KB · Views: 5
-
keep_cool09.jpg123.1 KB · Views: 5
-
keep_cool10.jpg102.5 KB · Views: 3