Ambulance conversion

[ricklapointe]

hi 
Living here in Niagara Falls Ontario.
I have been converting an old ambulance body that I put on an 7.3 powerstroke diesel chasis being an f450.
Its about 85 percent complete, so now I am looking for ideals on how to make drawer style refrigerators 
I am working with some newer bar fridges, were I have turned them on there side, flipped the compressor to accommodate this lay down fashion.
So now this bar fridge is going to be a chest fridge.
Which will be mounted on a slide system. Looking to put 3 stacked on top of each other and connected to 3 separate sine wave inverters.

 

[highdesertranger]

So do you mean you want to put the whole refrigerator on a slide?

If so just use heavy duty drawer slides. I have done that on one of mine. I will post up some pictures next week. you need to get the ones that can handle the weight.

Also you can buy them premade but boy they are expensive.

Highdesertranger

 

[ricklapointe]

Yes
Using mini fridge, roughly 30 inches long while on its side x 18 wide x18 
Yes I have heavy duty 150lbs slides that will more than handle the job.
What I need now is to find the right size inverter that can run the fridge without being to big.