Cleanheart your a cleaner so from one to another (well ex cleaner..)<br><br>1 pint bottle, fill with distilled/pure water<br>add in 25-30 drops of Tea Tree Oil<br>add in 35-40 drops of GSE - Grape seed extract<br>(can also use grafefruit seed extract but I am worried about ants with that)<br><br>This is a very very good mold blaster<br><br>To scrub;<br>Borax 60%<br>Baking Soda 40%<br>(these are true Mold killers, <br>Bleach pits the surface and allows the Mold roots to spread, so it is no win situation to use it)<br><br>you can also use Vinegar, but I am allergic to that so I stay away from it! <br><br>First spray with the solution, scrub quick with a brush, sprinkle the BB mix then spritz till it looks like icing sugar, wait about 15-20 min, then scrub off, use clear water.<br><br><div>Sprinkle Borax and Baking soda mix (60% Borax-40% Baking Soda) and spritze with the Tee Tree GSE mix until it looks like icing sugar, cover with plastic so it does not dry out fast and remove it in about 4 hrs. or so, wipe clean. Then Extract, Rince and Extract</div><div>- This is good for ANY surfaces, I did a wall in a basement that had mold and mildew growing on it 4yrs ago, it has not grown back since. </div><div> </div><br>This will not scratch the surface of anything, it is much finer than Clorox/Ajax or the like, works on all hard and semi hard surfaces. I have also used it on wood with great results.<br><br>Used this method time and time again, with excellent results. The home owner/business owner was always amazed and the Mold never came back, if the original source of the problem was dealt with. If it was caused by leaking roof, fix roof or yes it will come back. <br><br>If the wood is punky though, or it does the test strip look, as in long stringers of wood fibres, just cut out and replace it, best all around fix there.<br><br>To purchase, I would low ball an offer to buy, start at $450 which is probably scrap price and ask to hook back up to utilities if you can. If it runs, shifts into gears and all, it can be fixed! You might need to live in your car/van for a bit until the Mold is cleared out for health reasons.<br><br><br>for reference..<br><div>
www.moldacrossamerica.com<br><span style="font-size: 12.0pt; font-family: 'Times New Roman'; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-CA; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;" lang="EN-CA"><a href="
http://www.radonseal.com/molds/tea-tree.htm" rel="nofollow" target="_blank">
http://www.radonseal.com/molds/tea-tree.htm</a> <br></span><br>Also look for Concrobium - USA only so far, not in Canada<br><br></div><div> </div>