VJG1977
Well-known member
Before I left on the inaugural trip with my converted cargo trailer, I checked the lug nuts and greased the wheel bearings. I did not use a toque wrench just tried the lugs with a good four way lug wrench. The trailer came equipped with E-ZLUBE fittings. I picked up a grease gun and a cartridge of marine and off road grease. It took 25 to 30 pumps of the grease gun before the bearings were properly lubed.
During the trip I checked hub temperature with a Non-contact Digital Infrared Thermometer. At no time did the hub temperature exceed 105 degrees F.
During the trip I checked hub temperature with a Non-contact Digital Infrared Thermometer. At no time did the hub temperature exceed 105 degrees F.