Anybody know anything about Intronics?

[Canine]

The company is based in Mass.and the controllers are made in the USA.They have a 75 amp controller for $265.This would handle half of my panels and might be a good comparison to my pwm controllers.I could split my batteries into 2 groups of six and put an inverter on each group.I already have two inverters.I could pull another wire to the house and split the circuits.Then I would need some way to record the amps used by each circuit.

 

[jimindenver]

Bob

Is this the controller?

http://www.intronicspower.com/products/pdf/MPPT75.pdf

The specs are confusing. At one point it says the max Voc is 80v, at another it is 60. 25a for the load in one spot, 45 in another. One hour for absorption but two in a different spot.

At the bottom it says to turn off the absorption and equalization if using gel or AGM.

Just some quirks, I'm all for less expensive controllers.